LED Mirror Installation Guide
DOWNLOAD INSTALLATION GUIDE
LED Mirror Intallation Steps
1. Prepare the Installation Area
Clean the wall surface from dust, grease, and debris.
Make sure the wall is flat and strong enough to support the mirror.
Measure and mark the desired mirror position on the wall.
2. Turn Off the Power
Locate the appropriate circuit breaker and switch it off.
Confirm power is off using a voltage tester.
Inform household members to avoid turning it back on during installation.
3. Mark the Drill Holes
Use a level to align the mirror horizontally.
Mark mounting holes with a pencil based on the mirror’s template or back panel.
Double-check the markings before drilling.
4. Install Wall Anchors
Choose anchors appropriate for your wall type (drywall, tile, etc.).
Drill holes carefully to avoid damaging the surface.
Insert wall plugs or anchors securely.
5. Mount the Mirror
Carefully lift and align the mirror with the drilled holes.
Secure it with screws, using a second person if needed.
Ensure it’s stable and sits flush against the wall.
6. Connect Electrical Wiring
Match the live, neutral, and ground wires correctly.
Use wire nuts or terminal blocks for a safe connection.
Tuck wires securely into the wall or junction box.
7. Test and Adjust Features
Restore power and test LED lights, defogger, and touch controls.
Adjust brightness and color temperature (warm, neutral, cool).
Tighten any additional fasteners and check for stability.
8. Clean the Mirror Surface
Use a soft, non-abrasive cloth to remove fingerprints and dust.
Avoid harsh chemicals that can damage LED areas or coating.
Gently clean the edges and touch controls if applicable.
9. Final Check and Enjoy
Inspect the entire installation for stability and neatness.
Remove tools, packaging, and debris from the work area.
Step back and enjoy your new LED mirror!
