Bathroom Medicine Cabinet Installation Guide (Without LED Lights)
Royale Cabinet Installation Guide
DOWNLOAD INSTALLATION GUIDE
Royale Intallation Steps
1. Prepare the Installation Area
Clean the wall surface where the cabinet will be mounted.
Make sure the wall is flat, dry, and structurally sound.
Mark the center point and desired height for the cabinet.
2. Turn Off Any Nearby Power
If near electrical outlets or light fixtures, turn off the power.
Use a voltage tester to confirm it’s safe to work.
Ensure the installation zone is safe and dry.
3. Mark Mounting Points
Use a level to ensure the cabinet will be perfectly horizontal.
Measure and mark the top and bottom holes for mounting.
Double-check all spacing to match the cabinet’s back panel or bracket.
4. Drill the Holes
Choose the correct drill bit for your wall type (tile, drywall, etc.).
Drill pilot holes at the marked points carefully.
Clean away any dust or debris from the drilling area.
5. Insert Wall Anchors
Use appropriate anchors if mounting into drywall or plaster.
Tap anchors in gently until flush with the wall.
Make sure all anchors are secure before continuing.
6. Mount the Cabinet
Align the cabinet with the drilled holes or bracket.
Have someone assist you if the cabinet is large or heavy.
Screw the cabinet into place without overtightening.
7. Check for Level and Stability
Use a level to confirm the cabinet is straight.
Make minor adjustments if needed before final tightening.
Ensure the cabinet is securely fastened and doesn’t wobble.
8. Install the Shelves and Doors
Place shelf brackets inside the cabinet and insert shelves.
Mount the doors if they are packaged separately.
Adjust hinges for smooth and even door alignment.
9. Final Touches and Clean-Up
Remove protective film from mirrors or shelves.
Clean the cabinet surface with a soft cloth.
Dispose of packaging materials and enjoy your new cabinet!
